We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Vision TM-TELE project mount Ceiling White
SKU
TM-TELE
£66.28
In stock
TM-TELE, 440-735 mm
Category: Projector Mounts
EAN | 2418655000005 |
---|---|
Manufacturer | Vision |
Availability | Y |
- Universal projector ceiling mount with telescopic pole
- Overall length 440-735 mm
- Full adjustment: tilt at top for sloping ceilings / pitch and roll at the bottom
The TM-TELE Techmount is a projector ceiling bracket for anchoring any data projector safely to a ceiling. The telescopic design allows fast deployment and adjustment without the need cut and drill the pole. It has a greater range than most other telescopic mounts and the pole can be removed for “flush-mounting” the projector as close to the ceiling as possible. Note: unlike the TM-1200 the length of this bracket cannot be extended.
One-Man Installation
Thoughtful design detail include a length adjustment clamp system which requires only one hand.
Sloping Ceilings
A tilting mechanism is included which tilts to a full 90 degrees, allowing you to use the bracket as a boom if need be.
Safety Approved
A back-up fall-arrest tether is included which secures the projector to your bracket, and the pole has a mechanical stop so that the two parts of the pole cannot be separated. Vision recommends a maximum safe working load of 10kg which is well within the limits of the product and meets the BSi installation standard specification (PAS122:2009).
Easy fit
Projectors have threaded inserts in the bottom for attachment – but not all use the same diameter screws so Vision includes a selection to suit most projectors. Simply locate the “spider” arms on our bracket over the attachment holes, and insert a screw into the projector.
Obstruction-free Cable Management
Vision’s unique ‘chute-through’ system leaves cable access clear – even for big VGA connectors.
Tools Included
A spanner and pin-hex key are included. Vision also includes a hex-key bit for a power drill to speed up installation.
Secure
Quick-release mechanisms make life easier for thieves, so the TM-TELE is secure and features security bolts.
- Overall length 440-735 mm
- Full adjustment: tilt at top for sloping ceilings / pitch and roll at the bottom
The TM-TELE Techmount is a projector ceiling bracket for anchoring any data projector safely to a ceiling. The telescopic design allows fast deployment and adjustment without the need cut and drill the pole. It has a greater range than most other telescopic mounts and the pole can be removed for “flush-mounting” the projector as close to the ceiling as possible. Note: unlike the TM-1200 the length of this bracket cannot be extended.
One-Man Installation
Thoughtful design detail include a length adjustment clamp system which requires only one hand.
Sloping Ceilings
A tilting mechanism is included which tilts to a full 90 degrees, allowing you to use the bracket as a boom if need be.
Safety Approved
A back-up fall-arrest tether is included which secures the projector to your bracket, and the pole has a mechanical stop so that the two parts of the pole cannot be separated. Vision recommends a maximum safe working load of 10kg which is well within the limits of the product and meets the BSi installation standard specification (PAS122:2009).
Easy fit
Projectors have threaded inserts in the bottom for attachment – but not all use the same diameter screws so Vision includes a selection to suit most projectors. Simply locate the “spider” arms on our bracket over the attachment holes, and insert a screw into the projector.
Obstruction-free Cable Management
Vision’s unique ‘chute-through’ system leaves cable access clear – even for big VGA connectors.
Tools Included
A spanner and pin-hex key are included. Vision also includes a hex-key bit for a power drill to speed up installation.
Secure
Quick-release mechanisms make life easier for thieves, so the TM-TELE is secure and features security bolts.
Mounting | |
---|---|
Mounting type | Ceiling |
Maximum weight capacity | 10 kg |
Performance | |
Tilt angle range | 0 - 90° |
Mounting type | Ceiling |
Maximum weight capacity | 10 kg |
Product colour | White |
Ergonomics | |
Tilt angle range | 0 - 90° |
Product colour | White |
Weight & dimensions | |
---|---|
Depth (min) | 43.7 cm |
Depth (max) | 73.5 cm |
Technical details | |
Tilt angle range | 0 - 90° |
Mounting type | Ceiling |
Maximum weight capacity | 10 kg |
Product colour | White |
Logistics data | |
Harmonized System (HS) code | 83024190 |
You may also be interested in
Product |
![]()
£66.28
|
![]() Popular
SMS Smart Media Solutions CL F75 proje...
£81.98
|
![]()
£68.75
|
![]() Bestseller
Vision TM-1200 project mount Ceiling W...
£81.22
|
![]() Recommended
Vision TM-ST2 project mount Wall White
£96.95
|
![]() Hot Product
Optoma OCM818 project mount Wall/ceili...
£71.33
|
---|---|---|---|---|---|---|
SKU |
TM-TELE
|
AE014015
|
OCM815B
|
TM-1200
|
TM-ST2
|
OCM818B-RU
|
Description |
- Universal projector ceiling mount with telescopic pole
- Overall length 440-735 mm - Full adjustment: tilt at top for sloping ceilings / pitch and roll at the bottom The TM-TELE Techmount is a projector ceiling bracket for anchoring any data projector safely to a ceiling. The telescopic design allows fast deployment and adjustment without the need cut and drill the pole. It has a greater range than most other telescopic mounts and the pole can be removed for “flush-mounting” the projector as close to the ceiling as possible. Note: unlike the TM-1200 the length of this bracket cannot be extended. One-Man Installation Thoughtful design detail include a length adjustment clamp system which requires only one hand. Sloping Ceilings A tilting mechanism is included which tilts to a full 90 degrees, allowing you to use the bracket as a boom if need be. Safety Approved A back-up fall-arrest tether is included which secures the projector to your bracket, and the pole has a mechanical stop so that the two parts of the pole cannot be separated. Vision recommends a maximum safe working load of 10kg which is well within the limits of the product and meets the BSi installation standard specification (PAS122:2009). Easy fit Projectors have threaded inserts in the bottom for attachment – but not all use the same diameter screws so Vision includes a selection to suit most projectors. Simply locate the “spider” arms on our bracket over the attachment holes, and insert a screw into the projector. Obstruction-free Cable Management Vision’s unique ‘chute-through’ system leaves cable access clear – even for big VGA connectors. Tools Included A spanner and pin-hex key are included. Vision also includes a hex-key bit for a power drill to speed up installation. Secure Quick-release mechanisms make life easier for thieves, so the TM-TELE is secure and features security bolts. |
At the top of its game.
SMS Projector CL F is a popular ceiling bracket for lighter projectors. A construction that is as durable and reliable as it is eye-catching. Unsightly cables are hidden inside the bracket. SMS Projector CL F is the result of design and function working in harmony at an affordable price. The bracket is easy to install and the pillar can be cut to the desired length. The SMS Unislide is included in the package. |
The OCM815B Black Universal Projector Pole Mount is ideal for high ceilings. Easy to set up with its unique design gives you everything you need for quick adjustment, the flexibility to fit almost any projector and hassle free projector maintenance. It’s the perfect universal projector pole mount.
|
The Techmount is a universal projector ceiling bracket designed to secure most video data projectors safety and sturdily to your ceiling. We only have one projector ceiling bracket in our range: it comes with a 1.1m pole and it is designed to be useful in 99% of installations. That means built in flexibility allowing quick assembly in a number of different configurations, including "flush-mount" where the projector is as close to the ceiling as possible. We believe the fixed pole style we use is the best for rigidity, and because you cut it to length onsite, it has an infinitely variable length. Safety Approved We believe it is good practise to use a safety fall-arrest tether which secures the projector to your bracket, so we've included one. 20kg SWL Independent testing on calibrated hydraulic test equipment has shown a breaking-strain of half a ton! We recommend a maximum safe working load of 20kg which is well within it's limits. Obstruction-free Cable Management Rather than having a long bolt that runs through the pipe and blocks cable access, we use our unique quad-bolt Chute-through system which leaves cable access clear - even for a big VGA connector. Secure We believe quick-release mechanisms make life easier for thieves, so our mount is secure and features security bolts. Sloping Ceilings? If you have a sloping ceiling there is a tilting mechanism included which tilts to a full 90 degrees, allowing you to use the bracket as a boom if need be. Tools Included A spanner and pin-hex key are included. The only tool you'll need is a 2" pipe cutter (NOT INCLUDED - ask your hardware supplier for a pipe cutter with a 6-67mm range, and a metal cutting disk). With this tool you'll cut the pole like a knife through butter. We've also included a drilling jig so you can easily and accurately drill 9mm holes into the pole. Easy fit Fitting the bracket to the projector is simple; most projectors have threaded inserts in the bottom for attachment. But because not all use the same diameter screws we provide a selection of screws to suit almost all projectors. Simply adjust the arms on our bracket over the attachment holes, and insert a screw into the projector. Finish the job properly! TM-1200 Trim Disk Aesthetics are also enhanced by our exclusive retrofittable trim disk which is fitted to the pole in false-ceiling environments to properly finish the installation.
|
- Telescopic boom 930-1530mm (centre-of-projector to wall)
- Projector can be mounted at any point along boom - Adjustable boom slope |
Key Features
- Easy to install – Great flexibility and adaptability - Quick projector reconnect/disconnect - +/- 30° rotation - 70mm horizontal shift - +/- 20° pitch and roll - Adaptable to different projectors - Load capacity 15kg The OCM818 Universal Projector Flush Mount is suitable for installation in the office or at home. Its unique low-profile design gives you everything you need for quick adjustment and the flexibility to fit almost any projector. Easy to set up and available in black or white it’s the perfect universal projector flush mount. |
Short Description |
TM-TELE, 440-735 mm
|
Projector CL F75 Alu/silver + UniSlide
|
Ceiling Pole Mount, Capacity 15kg, +/- 30° Rotation, +/-20° Pitch/Roll, Black
|
TM-1200
|
TM-ST2 Short-Throw Projector Wall Mount
|
161 x 100 x 121 mm, 1.2 kg
|
Manufacturer |
Vision
|
SMS Smart Media Solutions
|
Optoma
|
Vision
|
Vision
|
Optoma
|