We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Moxa IMC-101-M-ST network media converter 100 Mbit/s 1310 nm
SKU
39197
£383.64
In stock
Industrial Ethernet-to-fiber media converters
- 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
- Link Fault Pass-Through (LFPT)
- Power failure, port break alarm by relay output
- Redundant power inputs
- -40 to 75°C operating temperature range (-T models)
- Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx)
Category: Network Media Converters
Maximum data transfer rate | 100 Mbit/s |
---|---|
EAN | 5703431391970 |
Manufacturer | Moxa |
Availability | Y |
Industrial 10/100BaseT(X) to 100BaseFX Media Converters
The IMC-101 industrial media converters provide industrial grade media conversion between 10/100BaseT(X) and 100BaseFX (SC/ST connectors). The IMC-101’s reliable industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101 converter comes with a relay output warning alarm to help prevent damage and loss. The IMC-101 media converters are designed for harsh industrial environments, such as in hazardous locations (Class 1, Division 2/Zone 2, DNV, and GL Certification), and comply with FCC, TV, UL, and CE standards. The IMC-101 series is available in models that support an operating temperature of 0 to 60˚C, and an extended operating temperature of -40 to 75˚C. All IMC-101 series are subjected to a 100% burn-in test.
Features:
- 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X;
- Link Fault Pass-Through (LFP) (media converters should work as a pair);
- Power failure, port break alarm by relay output;
- Redundant power inputs;
- 40 to 75°C operating temperature range (T models);
- Designed for hazardous locations (Class 1 Div. 2/Zone 2).
The IMC-101 industrial media converters provide industrial grade media conversion between 10/100BaseT(X) and 100BaseFX (SC/ST connectors). The IMC-101’s reliable industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101 converter comes with a relay output warning alarm to help prevent damage and loss. The IMC-101 media converters are designed for harsh industrial environments, such as in hazardous locations (Class 1, Division 2/Zone 2, DNV, and GL Certification), and comply with FCC, TV, UL, and CE standards. The IMC-101 series is available in models that support an operating temperature of 0 to 60˚C, and an extended operating temperature of -40 to 75˚C. All IMC-101 series are subjected to a 100% burn-in test.
Features:
- 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X;
- Link Fault Pass-Through (LFP) (media converters should work as a pair);
- Power failure, port break alarm by relay output;
- Redundant power inputs;
- 40 to 75°C operating temperature range (T models);
- Designed for hazardous locations (Class 1 Div. 2/Zone 2).
Technical details | |
---|---|
Wavelength | 1310 nm |
Maximum transfer distance | 5000 m |
Sensitivity | -32 dBmW |
Operating temperature (T-T) | 32 - 140 °F |
Power budget | 12 dB |
Weight & dimensions | |
Dimensions (WxDxH) | 53.6 x 135 x 105 mm |
Weight | 630 g |
Network | |
Cabling technology | 10/100Base-T(X), 100Base-FX |
Maximum data transfer rate | 100 Mbit/s |
Ports & interfaces | |
Connectivity technology | Wired |
Performance | |
Wavelength | 1310 nm |
Maximum transfer distance | 5000 m |
Sensitivity | -32 dBmW |
Mean time between failures (MTBF) | 401000 h |
Design | |
---|---|
Compliance industry standards | IEEE 802.3, IEEE 802.3u |
Certification | UL, CSA, FCC, CISPR |
Endurance | |
Mean time between failures (MTBF) | 401000 h |
Operational conditions | |
Operating temperature (T-T) | 0 - 60 °C |
Storage temperature (T-T) | -40 - 85 °C |
Operating relative humidity (H-H) | 5 - 95% |
Certificates | |
Certification | UL, CSA, FCC, CISPR |
Other features | |
Transmit power range | -10 |
Cabling technology | 10/100Base-T(X), 100Base-FX |
Power requirements | 24V, 0.16A |
Operating temperature (T-T) | 32 - 140 °F |
Interface | RJ-45, ST (2.5mm) |
Full duplex | Yes |
Dimensions (WxDxH) | 53.6 x 135 x 105 mm |
Compliance industry standards | IEEE 802.3, IEEE 802.3u |
Fiber type | 50/125, 62.5/125 µm |
Power budget | 12 dB |
You may also be interested in
Product |
![]() New
Moxa IMC-101-M-ST network media conver...
£383.64
|
![]() Popular
Cisco 100BASE-LX10 SFP network media c...
£334.61
|
![]()
£377.09
|
![]() Recommended
StarTech.com Gigabit Ethernet Single M...
£408.44
|
![]() Hot Product
Axis 5901-261 network media converter...
£459.25
|
![]() Bestseller
Cisco 10GBASE-LRM SFP Module for 10-Gi...
£519.79
|
---|---|---|---|---|---|---|
SKU |
39197
|
GLC-FE-100LX-RGD=
|
ET1000S40LC2
|
ET91000SM402
|
5901-261
|
SFP-10G-LRM=
|
Description |
Industrial 10/100BaseT(X) to 100BaseFX Media Converters
The IMC-101 industrial media converters provide industrial grade media conversion between 10/100BaseT(X) and 100BaseFX (SC/ST connectors). The IMC-101’s reliable industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101 converter comes with a relay output warning alarm to help prevent damage and loss. The IMC-101 media converters are designed for harsh industrial environments, such as in hazardous locations (Class 1, Division 2/Zone 2, DNV, and GL Certification), and comply with FCC, TV, UL, and CE standards. The IMC-101 series is available in models that support an operating temperature of 0 to 60˚C, and an extended operating temperature of -40 to 75˚C. All IMC-101 series are subjected to a 100% burn-in test. Features: - 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X; - Link Fault Pass-Through (LFP) (media converters should work as a pair); - Power failure, port break alarm by relay output; - Redundant power inputs; - 40 to 75°C operating temperature range (T models); - Designed for hazardous locations (Class 1 Div. 2/Zone 2). |
The Cisco® 100BASE-X Small Form-factor Pluggable (SFP) is a hot-swappable input/output device that plugs into a Fast Ethernet port or slot, linking the port with the network.
Main features: - Hot-swappable when deployed, the switch or router does not have to reboot. - Supports the "pay-as-you-populate" model. - Interchangeable with other 100BASE-X SFPs on the same line card. - Supports the Cisco quality ID feature that enables the switch or router to identify whether or not the SFP is a Cisco qualified SFP. - Optically interoperable with respective 100BASE-X Ethernet interfaces on the same link. |
Convert and extend a Gigabit Ethernet connection up to 24.8 miles/40km over Single Mode LC fiber
The ET1000S40LC2 1000 Mbps Gigabit Single-Mode Fiber Media Converter (LC, 40 km) enables you to extend a Gigabit Ethernet network over single-mode fiber, at distances up to 40km (25 miles). A cost-effective solution for connecting a Gigabit Ethernet (1000Base-T) network to remote network segments over a (1000Base-LX/SX) fiber backbone, the GbE to SM fiber converter supports full Gigabit speeds for ideal network performance and scalability. Designed to offer a durable and convenient Ethernet to fiber solution, the Ethernet to LC Fiber converter features an all-steel chassis, and a simple plug-and-play installation with minimal configuration required. For added versatility, this fiber media converter supports standalone operation, or installation into the 20 Slot, 2U Rackmount Chassis (ETCHS2U). Backed by a StarTech.com 2-year warranty and free lifetime technical support. The StarTech.com Advantage - Link loss forwarding, remote monitoring of status ensures maximum up-time - Provides Ethernet to Fiber conversion as a standalone device, or can be installed into the ETCHS2U 20 slot chassis for added versatility - Rugged steel casing for added durability in harsh environments - Cost-effective way to extend/bridge networks using fiber cabling |
Convert and extend a Gigabit Ethernet connection up to 24.8 miles/40 km over Single Mode SC fiber
The ET91000SM402 1000 Mbps Gigabit Single Mode Fiber Media Converter SC (40 km) lets you extend a Gigabit Ethernet network over single mode fiber by up to 40km (25 miles). A cost-effective solution for connecting a Gigabit Ethernet (1000Base-T) network to remote network segments over a (1000Base-LX/SX) fiber backbone, the GbE to SM fiber converter supports full Gigabit speeds for ideal network performance and scalability. Designed to offer a durable and convenient Ethernet to fiber solution, the Ethernet to SC Fiber converter features an all-steel chassis, and a simple plug-and-play installation with minimal configuration required. For added versatility, this fiber media converter supports standalone operation, or installation into the 20 Slot, 2U Rackmount Chassis (ETCHS2U). Backed by a StarTech.com 2-year warranty and free lifetime technical support. The StarTech.com Advantage - Link loss forwarding, remote status monitoring help ensure maximum up-time - Provides Ethernet to Fiber conversion as a standalone device, or can be installed into the ETCHS2U 20 slot chassis for added versatility - Rugged steel casing for added durability in harsh environments |
AXIS T8606 Media Converter Switch 24 V DC allows connection to the network using standard Ethernet or fiber optic cables that help lower the cost of installing the cameras over long distances. Perfect for city surveillance, airports and other long distance installations, AXIS T8606 is a DIN-mounted device that can convert an Ethernet signal to be used over optical fiber cable. Surveillance integrators in the field can also connect installation monitors and laptops (via the RJ45 connectors) to AXIS T8606 for camera maintenance and control. The media converter switch can be connected in a daisy chain network.
|
The Cisco 10GBASE-LRM SFP Module delivers 10-Gigabit Ethernet connectivity to customers with older Fibre Distributed Data Interface (FDDI), Optical Multimode 1 (OM1) and Optical Multimode 2 (OM2) Multimode Fibre (MMF) cable installation. It supports link lengths of 220 M on FDDI, OM1 and OM2. This input/output transceiver plugs into an Ethernet SFP+ port of a Cisco switch and offers optical interoperability with 10GBASE XENPAK, 10GBASE X2 and 10GBASE XFP interfaces on the same link.
|
Short Description |
Industrial Ethernet-to-fiber media converters
|
GLC-FE-100LX-RGD - 100BASE-X SFP For Fast Ethernet SFP Ports
|
1000 Mbps Gigabit Single Mode Fiber Media Converter LC 40 km
|
Gigabit Ethernet Single Mode Fiber Media Converter SC 40 km - 1000 Mbps
|
2 x SFP, 2 x RJ-45, 10/100 Mbps, 24 V DC
|
10GBASE-LRM SFP Module for 10-Gigabit Ethernet Deployments, Hot Swappable, 5-Year Standard Warranty (SFP-10G-LRM=)
|
Manufacturer |
Moxa
|
Cisco
|
StarTech.com
|
StarTech.com
|
Axis
|
Cisco
|