We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Lindy 70m Cat.6 HDMI 4K30 and IR Extender with PoC and Loop Out
SKU
38208
£67.78
In stock
70m Cat.6 HDMI 4K30 and IR Extender with PoC and Loop Out
- Extends HDMI and IR Signals up to 70m using a single Cat.6 Cable
- Supports resolutions up to 3840x2160@30Hz 4:4:4 8bit
- Features a loop-through HDMI output on the Transmitter for local monitoring
- Supports power over Cable, only a single power supply is required
- 2-year warranty
Category: AV Extenders
EAN | 4002888382083 |
---|---|
Manufacturer | Lindy |
Availability | Y |
Product Manuals (HTML) |
View Manual |
PDF URLs |
View PDF |
Cat.6 extenders allow for cost effective, reliable extension of audio or video signals over longer distances that are not possible with passive cable or active repeater solutions.
The Lindy 70m Cat.6 HDMI 4K30 and IR Extender is a simple to use solution which lets the user extend HDMI signals up to 70m using a single low cost Cat.6 U/UTP cable (not included). For added convenience, IR signals (20-60 kHz) can also be extended using the supplied IR receiver and emitter cables.
Supporting 4K resolutions up to 3840x2160@30Hz 4:4:4 8bit, video content can be seen with incredible clarity at distances up to 70m, perfect for use in a variety of AV and digital signage applications in a range of settings including residential setups, education, business, retail and healthcare.
This extender features an HDMI loop-out port on the transmitter for local simultaneous viewing so that a local display can be connected for monitoring or to create an additional viewing zone. To ensure the maximum compatibility when two displays are connected, the EDID data, which determines the supported video and audio formats, can be copied from either the local display connected to the transmitter or the remote display connected to the receiver.
Power over Cable (PoC) functionality enables the extender to operate from a single power supply connected to the transmitter, allowing the receiver to be located where there is limited access to mains power sockets, making it ideal for minimalist, discreet installations.
In addition to PoC functionality the extender's slim design allow it to be easier to install in limited spaces behind flat screen monitors or TVs.
Please Note: The quoted lengths and resolutions are possible with a direct connection between Transmitter and Receiver using good quality Cat.6 solid core cable. Using a different cable type, or introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
The Lindy 70m Cat.6 HDMI 4K30 and IR Extender is a simple to use solution which lets the user extend HDMI signals up to 70m using a single low cost Cat.6 U/UTP cable (not included). For added convenience, IR signals (20-60 kHz) can also be extended using the supplied IR receiver and emitter cables.
Supporting 4K resolutions up to 3840x2160@30Hz 4:4:4 8bit, video content can be seen with incredible clarity at distances up to 70m, perfect for use in a variety of AV and digital signage applications in a range of settings including residential setups, education, business, retail and healthcare.
This extender features an HDMI loop-out port on the transmitter for local simultaneous viewing so that a local display can be connected for monitoring or to create an additional viewing zone. To ensure the maximum compatibility when two displays are connected, the EDID data, which determines the supported video and audio formats, can be copied from either the local display connected to the transmitter or the remote display connected to the receiver.
Power over Cable (PoC) functionality enables the extender to operate from a single power supply connected to the transmitter, allowing the receiver to be located where there is limited access to mains power sockets, making it ideal for minimalist, discreet installations.
In addition to PoC functionality the extender's slim design allow it to be easier to install in limited spaces behind flat screen monitors or TVs.
Please Note: The quoted lengths and resolutions are possible with a direct connection between Transmitter and Receiver using good quality Cat.6 solid core cable. Using a different cable type, or introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
Features | |
---|---|
Material | Metal |
HDCP | Yes |
Audio output channels | 7.1 channels |
Maximum refresh rate | 60 Hz |
Certification | CE, FCC, RoHS, REACH |
Type | AV transmitter & receiver |
Maximum resolution | 3840 x 2160 pixels |
Cable types supported | Cat6 |
Maximum transfer distance | 70 m |
Supported graphics resolutions | 1920 x 1080 (HD 1080), 3840 x 2160 |
Bandwidth | 10.2 Gbit/s |
Product colour | Black |
Chipset | GSV1001 |
Extended display identification data (EDID) | Yes |
HDCP version | 1.4 |
Technical details | |
Material | Metal |
HDCP | Yes |
Audio output channels | 7.1 channels |
Maximum refresh rate | 60 Hz |
Certification | CE, FCC, RoHS, REACH |
Type | AV transmitter & receiver |
Maximum resolution | 3840 x 2160 pixels |
Cable types supported | Cat6 |
Maximum transfer distance | 70 m |
Supported graphics resolutions | 1920 x 1080 (HD 1080), 3840 x 2160 |
Bandwidth | 10.2 Gbit/s |
Product colour | Black |
Connectivity technology | Wired |
Compliance certificates | CE, REACH, RoHS |
Ports & interfaces | |
Remote (IR) output | 1 |
Remote (IR) input | 1 |
RJ-45 input ports | 1 |
RJ-45 output ports | 1 |
HDMI in | 1 |
Number of HDMI outputs | 2 |
HDMI version | 1.4 |
Connectivity technology | Wired |
Power | |
Input current | 1 A |
Operating voltage | 12 V |
Operational conditions | |
---|---|
Operating relative humidity (H-H) | 20 - 90% |
Storage temperature (T-T) | -20 - 60 °C |
Operating temperature (T-T) | 0 - 40 °C |
Weight & dimensions | |
Width | 79.5 mm |
Package depth | 70 mm |
Height | 16.5 mm |
Depth | 69 mm |
Package width | 200 mm |
Package height | 113 mm |
Weight | 130 g |
Package weight | 414 g |
Packaging data | |
Package depth | 70 mm |
Package width | 200 mm |
Package height | 113 mm |
Package weight | 414 g |
Packaging content | |
IR receiver included | Yes |
AC adapter included | Yes |
Manual | Yes |
You may also be interested in
Product |
![]() Bestseller
Lindy 70m Cat.6 HDMI 4K30 and IR Exten...
£67.78
|
![]()
£101.10
|
![]() Recommended
StarTech.com HDMI Signal Booster - HDM...
£72.60
|
![]() Popular
Lindy 150m Cat.6 TosLink (Optical) and...
£89.35
|
![]()
£90.97
|
![]() Hot Product
Vivolink VLHDMIEXT1-RV2 AV extender AV...
£90.97
|
---|---|---|---|---|---|---|
SKU |
38208
|
DPBOOST
|
HDBOOST4K
|
70456
|
VLHDMIEXT1-TV2
|
VLHDMIEXT1-RV2
|
Description |
Cat.6 extenders allow for cost effective, reliable extension of audio or video signals over longer distances that are not possible with passive cable or active repeater solutions.
The Lindy 70m Cat.6 HDMI 4K30 and IR Extender is a simple to use solution which lets the user extend HDMI signals up to 70m using a single low cost Cat.6 U/UTP cable (not included). For added convenience, IR signals (20-60 kHz) can also be extended using the supplied IR receiver and emitter cables. Supporting 4K resolutions up to 3840x2160@30Hz 4:4:4 8bit, video content can be seen with incredible clarity at distances up to 70m, perfect for use in a variety of AV and digital signage applications in a range of settings including residential setups, education, business, retail and healthcare. This extender features an HDMI loop-out port on the transmitter for local simultaneous viewing so that a local display can be connected for monitoring or to create an additional viewing zone. To ensure the maximum compatibility when two displays are connected, the EDID data, which determines the supported video and audio formats, can be copied from either the local display connected to the transmitter or the remote display connected to the receiver. Power over Cable (PoC) functionality enables the extender to operate from a single power supply connected to the transmitter, allowing the receiver to be located where there is limited access to mains power sockets, making it ideal for minimalist, discreet installations. In addition to PoC functionality the extender's slim design allow it to be easier to install in limited spaces behind flat screen monitors or TVs. Please Note: The quoted lengths and resolutions are possible with a direct connection between Transmitter and Receiver using good quality Cat.6 solid core cable. Using a different cable type, or introducing wall plates, couplers or patch panels will result in a reduction of possible distances. |
Amplify the strength of your DisplayPort signal to extend your video source up to 65 ft. over standard DP cabling
This DisplayPort signal booster lets you increase the signal strength of your DP video source using standard DisplayPort cables. You can achieve resolutions up to 4K at 60Hz, and depending on your desired resolution, the booster supports varying distances up to 65 ft. (20 m) away at 1080p 60Hz resolution. For inline installations, you can place the booster between two DisplayPort cables, up to 50 ft. in length at the video input, and up to 15 ft. in length at the video output. Maintains Ultra HD 4K video signals When extending DisplayPort over long distances using standard video cabling, higher resolutions can become unavailable. Using the DP signal booster ensures that you can depend on UHD resolutions up to 4K at 60Hz at up to 22 ft. (7 m). You can achieve even greater distances with lower resolution support -- up to 4K at 30Hz, at up to 42 ft. (13 m), and 1080p at 60Hz at up to 65 ft. (20 m). Easy and discreet installation With its small form factor, the DisplayPort booster is easy to hide, for a discreet installation. By extending your video signal using standard DP cables, the DisplayPort booster is a cost-effective alternative to more expensive extension systems that require the installation of a CAT5 or CAT6 cabling infrastructure. Compatible with varying distances The booster makes it easy to adjust your DisplayPort signal strength based on the distance of your cables, with equalization adjustment buttons. This means that you can adjust the amplification of your DisplayPort signal, to ensure your DisplayPort signal will be flawless even at distances up to 65 ft. (20 m). Support for varying distances makes the booster perfect for multi-device deployment across large institutions, such as boardrooms in corporate offices, classrooms in schools, or waiting rooms in hospitals, as these applications may require varied distances in different rooms. The DPBOOST is TAA compliant and backed by a 2-year StarTech.com warranty with free lifetime technical support. The StarTech.com Advantage |
Use this repeater to amplify your 4K HDMI signal and extend it 30 ft. using a standard HDMI cable
This 4K HDMI® signal booster lets you increase the signal strength of your HDMI video source so it can travel greater distances using standard HDMI cables. You can achieve resolutions up to 4K at 60Hz at distances of up to 30 ft. (10 m), and depending on your desired resolution, the booster supports distances up to 115 ft. (35 m) away at 1080p 60Hz resolution. To install the booster, place it between two HDMI cables. Reference the table below for supported resolutions and cable lengths. Cable length from source Cable length to display Total cable length Maximum resolution 50 ft. (15 m) 65 ft. (20 m) 115 ft. (35 m) 1080p (60 Hz) - 1920x1080 32 ft. (10 m) 50 ft. (15 m) 82 ft. (25 m) 4K (30 Hz) - 3840x2160 15 ft. (5 m) 15 ft. (5 m) 30 ft. (10 m) 4K (60 Hz) - 3840x2160 Maintains Ultra HD 4K video signals at 60Hz When you're extending HDMI over distances using standard video cabling, higher resolutions from your HDMI 2.0 devices can become unavailable after a few feet. Using this HDMI signal booster ensures that HDMI 2.0 resolutions up to UHD 4K at 60Hz are available even at distances up to 30 ft. (10 m). You can achieve even longer distances at lower resolutions -- up to 4K at 30Hz, at up to 82 ft. (25 m), and 1080p at 60Hz at up to 115 ft. (35 m). Easy and discreet installation With its small form factor design and no external power adapter, the HDMI booster is easy to hide, for a discreet installation. By extending your video signal using standard HDMI cables, the 4K booster is a cost-effective alternative to more expensive extension systems that require the installation of a CAT5 or CAT6 cabling infrastructure. Supports a variety of distances Support for a variety of extension distances makes the booster perfect for multi-device deployment across large institutions, such as boardrooms in corporate offices, classrooms in schools, or waiting rooms in hospitals, as these applications may require varied distances in different rooms. Note: To achieve resolutions up to 4K60, your video source, display and cabling must support HDMI 2.0. The HDBOOST4K is TAA compliant and backed by a 2-year StarTech.com warranty with free lifetime technical support. The StarTech.com Advantage |
The Lindy 150m Cat.6 TosLink (Optical) and Coaxial Digital Audio Extender is a high-quality solution for extending digital audio signals over long distances, using standard network cable. With TosLink (Optical) and coaxial inputs and outputs, this extender can be easily used with a variety of AV source devices including TVs and amplifiers, with speakers or soundbars located at the receiver side.Connected audio can be output simultaneously to provide splitting functionality from a single input, great for smaller audio broadcasting setups in underground railway stations, bus depots or medical facilities. This also allows simple conversion of TosLink and Coaxial signals into their opposing output.
Supporting both stereo and multi-channel audio extension, this extender will allow for impressive three-dimensional surround sound performance to compliment films and games when connected to the audio source device, as well as crystal clear speech from user generated audio. This provides the user with an excellent point to point solution, ideal for use in immersive residential cinema rooms or creating a more attractive and enticing retail experience. PoC (Power over Cable) functionality, the supply of power and data signals over Cat.6 cable on a point to point connection between the transmitter and receiver also brings additional flexibility as only one power supply is required at the transmitter unit, ideal when power outlets are limited at the receiver end of the installation. Please note: simultaneous output is only possible when identical 96KHz sample rates are used |
Transmitter unit with IR transmitter Max resolution 1080P@60hz
VLHDMIEXT1-TV2 is transmitter for VLHDMIEXT1-RV2 It can extend video/audio/IR with a resolution of 1080P@60 Hz up to 120 meters via single network cable (Cat 5e/6) Up to 253 receivers can be connected to one transmitter using Gbit switch. One receiver will occupy 18Mbit bandwith. Note that this product is not compatible with HDBaseT receivers Typical installation: It can be installed anywhere to extend HDMI signal up to 120m including AV/IR control signals E.g. Private installation, Info screens in Shops or offices Function: HDMI extender Point to point,Tx to Rx for 120m 1080P@60Hz Signal can be spitted with a GBit Switch to several receivers One receiver device only occupy 18M bandwidth. Key features: Super cost-effective HDMI extender over IP network TX: 192.168.1.210 RX: 192.168.1.220 |
Receiver unit with IR receiver Max resolution 1080P@60hz
VLHDMIEXT1-RV2 is a receiver part for VLHDMIEXT1-TV2 It can extend video/audio/IR with a resolution of 1080P@60 Hz up to 120 meters via single network cable (Cat 5e/6) Up to 253 receivers can be connected to one transmitter using Gbit switch. One receiver will occupy 18Mbit bandwith. Note that this product is not compatible with HDBaseT receivers Typical installation: It can be installed anywhere to extend HDMI signal up to 120m including AV/IR control signals E.g. Private installation, Info screens in Shops or offices Function: HDMI extender Point to point,Tx to Rx for 120m 1080P@60Hz Signal can be spitted with a GBit Switch to several receivers One receiver device only occupy 18M bandwidth. Key features: Super cost-effective HDMI extender over IP network TX: 192.168.1.210 RX: 192.168.1.220 |
Short Description |
70m Cat.6 HDMI 4K30 and IR Extender with PoC and Loop Out
|
StarTech.com DisplayPort Signal Booster - DisplayPort to DisplayPort Video Signal Amplifier - 4K 60Hz DisplayPort Extender (DPBOOST)
|
StarTech.com HDMI Signal Booster - HDMI Repeater Extender - 4K 60Hz
|
150m Cat.6 TosLink (Optical) and Coaxial Digital Audio Extender
|
HDMI over IP 120m 1:253 + IR, Transmitter
|
HDMI over IP 120m 1:253 + IR, Receiver
|
Manufacturer |
Lindy
|
StarTech.com
|
StarTech.com
|
Lindy
|
VivoLink
|
VivoLink
|