We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
ICY BOX IB-2914MSCL-C31 USB 3.2 Gen 2 (3.1 Gen 2) Type-C Black
SKU
IB-2914MSCL-C31
£88.70
In stock
Docking & Clonstation for M.2 NVMe SSD & 2.5''/3.5'' SATA SSD/HDD
- NEW AT ICY BOX: The world has waited a long time for this, now it's done: ICY BOX offers the first cloning station for 2.5'' and 3.5'' hard disks on M.2 NVMe SSD. Ignite the turbo for your system
- 100% TOOLLESS: Everything is very simple with ICY BOX. The unit is quickly installed with Plug & Play. The storage media are changed very simply and in a flash without tools. That saves time and nerves
- IGNITE THE DATA TURB: With USB 3.2 Gen 2, data transfer rates of up to 10 Gbit/s can be achieved. So you can take full advantage of the performance of your storage media and benefit from short charging times
- FLEXIBILITY: The USB 3.2 Gen 2 combo cable has a USB Type-C plug and also has a fixed Type-A adapter. Thus, there is always the possibility to choose the suitable host connection
- STATUS LEDs: The status LED reliably indicates the current cloning progress from 0% to 100%. In addition, there is a status LED for each drive, which informs about operation and access
Category: Storage Drive Docking Stations
EAN | 5715063545461 |
---|---|
Manufacturer | ICY BOX |
Availability | Y |
Product Manuals (HTML) |
View Manual |
PDF URLs |
View PDF |
The new world of cloning
Finally clone 2.5" and 3.5" SATA hard disks to an M.2 NVMe. ICY BOX makes it possible! The cloning direction can be easily changed with a slide switch, then the system clones from M.2 NVMe SSD to a 2.5" or 3.5" HDD/SSD. One push of a button is all it takes to finally make your system faster.
A useful device even without cloning
Simply use the ICY BOX IB-2914MSCL-C31 as a DockingStation and conveniently access your 2.5"/3.5" SATA or M.2 NVMe SSD as external storage. Simply connect with the USB 3.2 Gen 2 combo cable via USB Type-C® or Type-A and ignite the data turbo with up to 10 Gbit/s.
Completely without tools
There is no such thing as complicated with ICY BOX. The installation of the cloning station or the change of storage media is very simple and can be done in a flash without tools. It does not matter whether the 2.5"/3.5" hard disk or the M.2 NVMe SSD is to be installed.
Finally clone 2.5" and 3.5" SATA hard disks to an M.2 NVMe. ICY BOX makes it possible! The cloning direction can be easily changed with a slide switch, then the system clones from M.2 NVMe SSD to a 2.5" or 3.5" HDD/SSD. One push of a button is all it takes to finally make your system faster.
A useful device even without cloning
Simply use the ICY BOX IB-2914MSCL-C31 as a DockingStation and conveniently access your 2.5"/3.5" SATA or M.2 NVMe SSD as external storage. Simply connect with the USB 3.2 Gen 2 combo cable via USB Type-C® or Type-A and ignite the data turbo with up to 10 Gbit/s.
Completely without tools
There is no such thing as complicated with ICY BOX. The installation of the cloning station or the change of storage media is very simple and can be done in a flash without tools. It does not matter whether the 2.5"/3.5" hard disk or the M.2 NVMe SSD is to be installed.
Hard drive | |
---|---|
Storage media type | HDD, SSD |
Storage drive interface | Serial ATA, Serial ATA II, Serial ATA III |
Storage drive sizes supported | 2.5,3.5,M.2 |
Ports & interfaces | |
Host interface | USB 3.2 Gen 2 (3.1 Gen 2) Type-C |
DC-in jack | Yes |
Technical details | |
Country of origin | China |
Package width | 118 mm |
Package height | 67 mm |
Maximum data transfer rate | 10 Gbit/s |
Product colour | Black |
Material | Aluminium, Plastic |
Plug and Play | Yes |
On/off switch | Yes |
Features | |
Country of origin | China |
Maximum data transfer rate | 10 Gbit/s |
LED indicators | Access, Power |
Product colour | Black |
Material | Aluminium, Plastic |
Plug and Play | Yes |
On/off switch | Yes |
Software | |
Mac compatibility | Yes |
Windows operating systems supported | Yes |
Weight & dimensions | |
---|---|
Width | 100 mm |
Depth | 144 mm |
Height | 59 mm |
Packaging data | |
Package depth | 247 mm |
Package width | 118 mm |
Package height | 67 mm |
Package weight | 660 g |
Packaging content | |
Manual | Yes |
Indication | |
LED indicators | Access, Power |
Ethernet LAN features | |
LED indicators | Access, Power |
Logistics data | |
Country of origin | China |
Master (outer) case width | 510 mm |
Master (outer) case length | 350 mm |
Master (outer) case height | 255 mm |
Master (outer) case gross weight | 14 kg |
Products per master (outer) case | 20 pc(s) |
You may also be interested in
Product |
![]()
£88.70
|
![]()
£76.03
|
![]() Popular
StarTech.com Dual-Bay USB 3.0 to SATA...
£72.56
|
![]() Recommended
StarTech.com Dual-Bay USB 3.0 to SATA...
£77.84
|
![]() Bestseller
StarTech.com Dual-Bay USB 3.2 Gen 2 to...
£99.66
|
![]() Hot Product
OWC OWCTCDRVDCK storage drive docking...
£105.30
|
---|---|---|---|---|---|---|
SKU |
IB-2914MSCL-C31
|
SDOCK2U33EB
|
SDOCK2U33
|
UNIDOCKU33
|
SDOCK2U313
|
OWCTCDRVDCK
|
Description |
The new world of cloning
Finally clone 2.5" and 3.5" SATA hard disks to an M.2 NVMe. ICY BOX makes it possible! The cloning direction can be easily changed with a slide switch, then the system clones from M.2 NVMe SSD to a 2.5" or 3.5" HDD/SSD. One push of a button is all it takes to finally make your system faster. A useful device even without cloning Simply use the ICY BOX IB-2914MSCL-C31 as a DockingStation and conveniently access your 2.5"/3.5" SATA or M.2 NVMe SSD as external storage. Simply connect with the USB 3.2 Gen 2 combo cable via USB Type-C® or Type-A and ignite the data turbo with up to 10 Gbit/s. Completely without tools There is no such thing as complicated with ICY BOX. The installation of the cloning station or the change of storage media is very simple and can be done in a flash without tools. It does not matter whether the 2.5"/3.5" hard disk or the M.2 NVMe SSD is to be installed. |
External SSD/HDD Docking Station | USB 3.2 Gen 1 (5 Gbps) / eSATA to SATA
The SDOCK2U33EB Dual 2.5/3.5" SATA hard drive docking station lets you dock and swap hard drives from your desktop or laptop computer simultaneously using a single eSATA or USB port. For fast performance and efficient data transfers when connected through eSATA, the docking station supports full SATA III transfer speeds -- up to 6 Gbps. For universal compatibility, the dock can be connected through USB 3.0 with transfer speeds up 5 Gbps plus support for UASP, which supports performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details. The hard drive docking station supports the fastest drive technologies including SATA III (6 Gbps), hybrid drives and solid state drives (SSD), ensuring you can save time by getting the most out of your drive performance. Extend the value of this hard drive docking station further with the addition of our SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock. To ensure compatibility with your computer system, the SDOCK2U33EB supports all of the leading operating systems, including: Microsoft Windows® (8/7/Vista/XP/Server 2008/Server 2003), Apple® OSX (10.9/10.8/10.7/10.6), Linux, and Google Chrome OS™. The SDOCK2U33EB is backed by a StarTech.com 2-year warranty and free lifetime technical support. Improved Performance with UASP UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive. The StarTech.com Advantage |
External SSD/HDD Docking Station | USB 3.2 Gen 1 (5 Gbps) to SATA I/II/III
Our SDOCK2U33 Dual-Bay USB 3.0 to SATA Hard Drive Docking Station enables access to two 2.5/3.5" SATA drives from your desktop or laptop computer over USB 3.2 Gen 1 (5 Gbps). The hard drive dock features power buttons for each individual drive, ensuring you can operate each hard drive separately. This gives you the freedom to hot-swap an idle drive while transferring data to another, saving you time. Extend the value of this hard drive docking station further with the addition of our SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock. Compatible with Any Capacity or File Format Compatible with 2.5" and/or 3.5" SATA HDDs and SSDs of any capacity and file format recognized by your host system. This dock works with any Operating System. Drivers and software are not required. SDOCK2U33 is backed by a StarTech.com 2-year warranty and free lifetime technical support. The StarTech.com Advantage |
External SSD/HDD Docking Station | USB 3.2 Gen 1 (5 Gbps) to SATA III and IDE
The UNIDOCKU33 USB 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray. Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for further details. The slot-loading design holds the SATA and IDE drives upright inside the docks, neatly keeping them off the desk, for convenience and a clutter-free setup. For SATA drives, the HDD can be inserted and connected directly through the designated dock slot, while the IDE drive slot is conveniently positioned near the rear panel 40-pin data and LP4 power connections, making it easy to connect to the dock using the included IDE data and power cables. A single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously - a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to greatly increase the storage and backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" and 2TB 2.5" drives). The UNIDOCKU33 is backed by a StarTech.com 2-year warranty and free lifetime technical support. Improved Performance with UASP UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive. The StarTech.com Advantage |
External SSD/HDD Docking Station | USB 3.2 Gen 2 (10 Gbps) to SATA I/II/III
Get unprecedented performance and storage capacity with this USB 3.2 Gen 2 (10Gbps) dual-drive docking station. It supports both 2.5" and 3.5" form factor solid-state and hard drives, with a high capacity storage capability of 32TB (16TB per drive). Harness the speed of USB 3.2 Gen 2 (USB 10Gbps) USB 3.2 Gen 2 gives you greater bandwidth and speed with file transfer rates of up to 10 Gbps - twice the speed of USB 3.0 (USB 3.2 Gen 1) technology. It lets you leverage the high performance of the latest SSDs and hard drives, while alleviating bottlenecks in your data transfers. Top-loading design for easy drive access It's never been easier to dock and swap drives from your desktop computer or laptop. Simply insert your drives into the top loading slot, with no tools or trays required. The HDD ejection button allows fast and simple drive removal. Convenient compatibility The dual-drive docking station comes with a USB Type-A to B cable, providing backward compatibility with your existing USB 3.0, 2.0 and 1.x devices. It also supports UASP for enhanced performance. Extend the value of this hard drive docking station further with the addition of our SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5" or 3.5" IDE hard drive into a SATA hard drive dock. The StarTech.com Advantage |
The Workhorse Drive Dock
Drive Dock is the ultimate, high-performance bare drive access tool. For creative workflows, backup, or other tasks requiring constant access to multiple drives, Drive Dock delivers a compact, easy solution with the performance of a USB 3.1 Gen 2 interface. An Essential Workflow Solution OWC Drive Dock is the easiest way to access bare SATA drives. Hot swap, read multiple drives simultaneously, or boot from bare drives. For video and audio content pros working with multiple bare drives on big projects, Drive Dock delivers amazing flexibility and convenience, making it an indispensable drive tool. Designed to Accommodate Your Life Drive Dock's unique design makes hot-swapping a breeze. Two drive bays accommodate both 2.5" and 3.5" drives and can access a drive in each simultaneously. Each bay features its own independent power switch and LED activity monitor. Drive Dock uses a USB 3.1 Gen 2 interface with data rates up to 981MB/s for versatile compatibility and an auto-switching internal power supply compatible with standard dual-prong power cables. Customized Flexibility Drive Dock is flexible enough to use on almost any system and is compatible with Thunderbolt 3 ports. It works perfectly as an on-location backup solution, or for industry professionals using multiple bare drives. Featuring rugged aluminum construction, quiet, fanless operation, and complete with both a USB 3.1 Gen 2 Type-C cable and a USB 3.1 Gen 1 Type-C to Type-A cable, the OWC Drive Dock streamlines high-demand workflow. |
Short Description |
Docking & Clonstation for M.2 NVMe SSD & 2.5''/3.5'' SATA SSD/HDD
|
StarTech.com Dual-Bay USB 3.0 / eSATA to SATA Hard Drive Docking Station, External 2.5/3.5" SATA I/II/III, SSD/HDD Docking Station, Hot-Swap Hard Drive Bays, Top-Loading (SDOCK2U33EB)
|
StarTech.com Dual-Bay USB 3.0 to SATA Hard Drive Docking Station, USB Hard Drive Dock, External 2.5/3.5" SATA I/II/III, SSD/HDD Docking Station, Hot-Swap Hard Drive Bay, Top-Loading (SDOCK2U33)
|
StarTech.com Dual-Bay USB 3.0 to SATA and IDE Hard Drive Docking Station, USB Hard Drive Dock, External 2.5/3.5" SATA III / IDE, SSD/HDD Docking Station, Hot-Swap Drive Bays, Top-Loading (UNIDOCKU33)
|
StarTech.com Dual-Bay USB 3.1 to SATA Hard Drive Docking Station, USB 3.1 (10 Gbps), External 2.5/3.5" SATA I/II/III, SSD/HDD Docking Station, Hot-Swap Hard Drive Bay, Top-Loading (SDOCK2U313)
|
2x 3.5"/2.5 SATA III, USB3.1 Gen2 Type-C
|
Manufacturer |
ICY BOX
|
StarTech.com
|
StarTech.com
|
StarTech.com
|
StarTech.com
|
OWC
|